Doyon JAOP12SL User Manual download pdf (Page 19)

A-16

PROGRAM MODE

This mode is used to program a Cook Recipe.

Cook Program structure

A cook program consists of a name as well as a number of steps. The name is pre-programmed into

the unit (each name can have up to 30 characters). Each step has the following programmable

parameters:

Oven temperature: the oven set point for this step.

Food temperature: the food temperature at which this step will end.

Time: the time duration for the current step.

Steam: the time steam is injected into the oven at the beginning of the step.

Fan: fan mode.

Aux.: on or off during step (only programmable via PC).

Rack: on or off during step.

Step End: user action needed at the end of step.

Programming

LED/Display

□ 1

line displays currently selected parameter’s value.

□ 2

line displays current step.

Keys

□ To program or modify a recipe program, select the recipe name first, press and hold for 3

seconds on the Program key. This will give you access to the recipe program. If no

change is made in the recipe during more than 5 seconds, the controller will exit the recipe

program mode by itself and go back to standby mode.

□ All parameters can be programmed in any order within a step.

To program or modify a recipe, follow these steps :

□ Use the parameter keys (Temperature, Time, Steam, Pulse-Steam, Fan, Rack, or Step End) to

display and change its value.

○ Temperature key is used twice to program 2 parameters: Oven Set Point and Food

Temperature.

□ Use the Up / Down keys to change the current parameter.

□ Use the Previous / Next keys to change the current step number.

□ If Step End key is set to LAST

, it is considered to be the last step of the program even though

more steps may follow in the program.

□ After last step is programmed, hold the Program key for 3 seconds to exit programming

mode.

Valid programming ranges

Temperature

□ 50-500°F / 10-260°C

Food Temperature

□ 125-225°F / 51-107°C, must be enabled in Low-level programming to be used.

Time

□ Time is programmed in HH:MM.SS

□ Time can be programmed at any value between 00:00 minimum and 12:00 maximum.

□ Default is 00:00 for all steps / programs.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Comments to this Manuals

No comments

Doyon JAOP12SL User Manual Page 19

Comments to this Manuals

Related products and manuals for Kiln Doyon JAOP12SL